Rimage PrismPlus! User's Guide download pdf (Page 7)

Chapter 1

Overview

This chapter:

• Introduces you to the CD printer

• Ribbon types and ribbon consumption

• Supplied Software and Print Driver

• Color Basics

• Identifies basic operator parts

• Describes the control panel

Introduction

Each Prism Printer model is a thermal transfer CD printer that can print text and

graphics at 300x300 or 300x600 dots per inch (dpi) on the surface of the CD. These

printers can print a color image on a disc by using a multicolor ribbon, or can print a

single color image with a single color ribbon. Printing in color, or in a single color, is

dependant on the printer model, the installed print driver settings, the type of media

surface, and the type of ribbon installed in the printer.

This user guide covers the following Rimage Prism Printer models:

• Standalone model connects to your PC and is not connected to any automated

equipment.

• Automated models mount on top of the Rimage Perfect Image Autostar, Amigo,

AutoPrinter, Prostar, or Protégé systems; and, some OEM assemblies.

Changes for This Revision

The following changes have been made for revision C of this user guide:

• Added reference to a newly added beep that is heard when Prism is powered

on. See page 20.

• Added procedure for toggling the Prism printer’s AutoPrism mode. See page

20.

• Removed Diagnostic Test #16 from current use. It is now listed as reserved

for future use. See page 58.

• Removed and reassigned footnotes to Diagnostic Tests. See page 58.

• Mono-Color ribbon can print 2000 discs – See page 63.

• Removed Midnight Blue Ribbon from table on page 64.

• Updated LED conditions, on page 12 and updated Status Messages on page 48.

1 2 3 4 5 6 7 8 9 10 11 12 ... 74 75

No comments

Rimage PrismPlus! User's Guide Page 7