Rimage PrismPlus! User's Guide download pdf (Page 38)

5. Select the Device Options tab for Windows 9X, or Device Settings tab for

Windows NT/2000.

6. Change the Print Strobe settings to the match the Media Type selected in the

Rimage CD Print driver. The Media Type and the installed ribbon determines the

print strobe setting. The table below provides a guideline to get you started. Use

the lowest setting possible while obtaining the best print to maximize the

printhead life.

Note: Discs that are silk-screened with a single-color ink may or may not produce

acceptable results. Some silkscreen inks do not allow the Rimage ribbons to

adhere to the surface.

Media Surface

Description

Black Ribbon

#201737-006

Red Ribbon

#202082-002

Multicolor

Ribbon

#202506-001

Lacquer, DVD, or

Regular

325-425 µs 400-500 µs

380-480 µs

See note below table.

Thermal white

overcoat

350-450 µs 400-550 µs 350-550 µs

Note: Not all Lacquer surface discs work. See the Rimage web site for latest information.

Windows NT Windows 95/98

7. Make changes to the strobe settings if these results are found after a CD was

printed.

• If the printed label is faded, or appears that the ink is not filling in, increase

the strobe setting. Try increments of 25-5µs.

• If the edges of the printed objects are bleeding, or if there are horizontal lines

missing in solid printed areas, reduce the strobe setting. See an example of

horizontal lines in reference #6 on page 53.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 74 75

No comments

Rimage PrismPlus! User's Guide Page 38