Rimage 360i Installation Guide download pdf (Page 20)

Rimage 360i™ Knowledge Base

 In Windows 2000, a warning message that the software you are about to install does not

contain a digital signature displays. To install the software, select Yes.

 In Windows XP, a warning message that the software has not passed Windows Logo

testing displays. To install the software, select Continue Anyway.

Autoloader

- Important! Try these solutions in the order they are presented.

• Restart QuickDisc.

• Use a different USB port because Windows sometimes loses connection to the port. See

previous verbiage

• Reseat the USB connection at the Rimage 360i and the computer. Then reseat the power

cable at the Rimage 360i and at the power source.

1. Power off the Rimage 360i.

2. Disconnect the cables.

3. Connect the cables, ensuring that they are all secure.

4. Power on the Rimage 360i.

• Reinstall CP2101 device.

1. Navigate to the Device Manager.

a. Right click on My Computer.

b. Select Properties. The System Properties window opens.

c. Select the Hardware tab.

d. Click Device Manager. The Device Manager window opens.

2. Select the Ports.

3. Select and delete the CP2101 device.

4. Restart the computer to reinstall the device.

Recorder

• Restart the computer.

• Update the firmware. To find the latest firmware, refer to the

Downloads tab on the Support

website. Navigate:

www.rimage.com > Support > Desktop > 360i. Select the Downloads tab.

Download the latest firmware.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

No comments

Rimage 360i Installation Guide Page 20