Rimage PrismPlus! User's Guide Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 174
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
12 110635_K
Rimage PrismPlus! User Guide
Parts Information
Operator Panel
The operator panel is located on the front
of the printer. There are four indicator
lights and an operator button on the
operator panel.
Operator Button
Press the operator button to open and close
the printer tray. The Error indicator light is
in the center of the operator button. Refer to
the Indicator Lights section below for more
information.
Indicator Lights
The name and function of each indicator light is described below. Each indicator light reects different conditions on the
Standalone Prism printer. Prism printers that are mounted on autoloaders or AutoPrism AutoPrinters have different conditions.
Refer to your autoloader or AutoPrinter user guide for more information about these conditions.
Image Name Functionality
Error
indicator
light
The yellow Error indicator light on the operator button illuminates when an error occurs during
printing.
The Error indicator light and the Disc Not Present indicator light ash when the printer is in
cleaning mode.
The Error indicator light illuminates and the Disc Not Present indicator light ashes at a slow
rate when the ribbon is out.
Disc Not
Present
indicator
light
The yellow Disc Not Present indicator light ashes a fault code when an error occurs. After the
error is resolved, press the operator button to turn off the indicator light.
The Disc Not Present indicator light illuminates when the tray is empty or when the disc is not
properly clamped. When a disc is placed on the tray, the Disc Not Present indicator light turns
off.
In Multiply Copy mode, the Disc Not Present indicator light illuminates until the disc is removed
from the pad.
The Disc Not Present indicator light ashes continuously at slow rate when the ribbon is low
(less than 100 prints remain). This applies only to monocolor ribbons and only if you have not
changed or switched ribbons since loading the current ribbon.
The Disc Not Present indicator light ashes at a slow rate and the Error indicator light
illuminates when the ribbon is out.
The Disc Not Present indicator light and the Error indicator light ash when the printer is in
cleaning mode.
Active
indicator
light
The yellow Active indicator light ashes when the printer is operating.
The Active indicator light ashes continuously at a slow rate when the printer is in AutoPrinter
mode.
Power
indicator
light
The green Power indicator light illuminates when the printer is powered on.
The Power indicator light ashes when the system board requires reprogramming.
The Power indicator light turns off when the printer detects a bad pixel element in the print
head. The Power indicator light turns back on when a disc is placed on the tray and you can
continue to print discs. If you continue to print, small lines may occur in your print jobs. This is
an indication that the print head may require replacement.
The Power indicator light turns off when the printer is powered off.
Operator Panel
Operator Button with
Error Indicator Light
Disc Not Present
Indicator Light
Active Indicator Light
Power Indicator Light
English
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 173 174

Comments to this Manuals

No comments